Parker G101/G102 Derict Mount Dump Gear Pump

Parker G101/G102 Series Combination Derict Mount Dump Hydraulic Gear Pump/Valve

HYLEMAN corporation specializes in Hydraulic Gear Pump / Piston Pump / Vane Pump / Piston Motor and Slewing Gear Boxes manufacturing, sales and development. Our products are widely used at Marine, Mining Machinery, Construction Machinery, Agricultural Machinery, Forestry Machinery, Steel Industry and so on. We pursuit to be the global leading hydraulic motors and pumps manufacturer and service provider. Customer first is one of our key value. We appreciate cooperating with friends from all over the world.

Parker's G101/G102 series dump pumps provide the most reliable, trouble free performance in the industry for dump truck and trailer applications. Operating pressures up to 172 bar (2,500 psi), speeds up to 2,400 rpm, flows up to 16.9 gpm.
 

Pump/Valve Products
C101/C102
• 39 & 48 gpm @ 1800 rpm
• Pressures to 2500 psi
• Speeds to 2400 rpm
• 2- or 3-line installations
• Choice of mountings
• Air remote operators available
• Relief valve protects pump & cylinder
G101/G102
• 9.5, 21 & 29 gpm @ 1800 rpm
• Pressures to 2500 psi
• Speeds to 2400 rpm
• 2- or 3-line installations
• Choice of mountings
• Air remote operators available
• Relief valve protects pump & cylinde

Main Features:

The key task of gear pumps is to convert mechanical energy (torque and rotational speed) into hydraulic energy (flow and pressure). To reduce heat loss, Our Parker series Gear pumps are designed to be extremely efficient. This efficiency is achieved through pressure-dependent gap sealing and high-precision manufacturing technology. Dump Pump suited for all kinds of dump pump engineering vehicle. We can make varies of hydraulic pumps motor parts with factory direct prices and have state of the art machining testing facilities to assist clients with their projects.

Combination pumps: • Pump with Direction Control Valve configured Relief, Spool at raise or neutral position, to protect the system. • 2-line installation fit for intermittent operation only,3-line installation fit for continuous or intermittent operation. • Manual and pneumatic operation ,customer can replace parts to switch operation way. • Rated pressure : 175/210bar Speed range :600-2400 RPM

 

Available Models:
G101/102 C101/102 P30/31 P50/51 P75/76 P315 P330/350 P365

 

 

 

 

 

 

 

 

 

 

 

Technical Data:

 

 

 

 

 

PICK THE CORRECT SERIES		G SERIES		C SERIES
DRW.NO.	DESCRIPTION	DOYLE NO,	GENERAL NO.	DOYLE NO.	GENERAL NO.
Not Shown	ONLYHEX NUT	NA	NA		391-1451-076
2	ONLYWASHER	NA	NA		391-3784-028
3	101 BRACKET OPTIONAL	NA	NA		314-0100-005
4	101 SNAP RING	HPN-208	391-2681-487		391-2681-483
5	101 LIPSEAL		391-2883-119		391-2883-096
6	101 SHAFT END COVER		308-5016-201	XB-1686-3	314-5039-201
7	RING SEAL	HPN-126	391-2585-006	HPN-114	391-2585-009
8	ROLLER BRG.	MY1032	391-0381-068	MS1032	391-0381-059
9	THRUST PLATE	AA-1058	391-2185-013	HPN-017	391-2185-012
Not Shown	POCKET SEAL		391-2882-086		391-2882-050
11	101 SHAFT&GEARSET		312-29XX-842	HPN-046-XX	314-29XX-640
12	GEAR HOUSING GASKET		391-2884-019		391-2884-021
13	GEAR HOUSING		308-80XX-901	TA-1688-xX	314-80XX-100
14a	101 PORT END COVER		308-3910-902	HPN-043-1	314-3910-903
14b	102 PORT END COVER		308-3910-901	HPN-043	314-3910-904
15	SPOOL VALVE		308-4000-001	HPN-087	314-4000-001
16	QUAD RING		391-1985-014		391-2881-103
17	WIPER RING		391-2883-152		391-2883-147
18	C ONLY RETAINER RING	NA	NA	HPN-054	391-3782-126
19	C ONLY SNAP RING	NA	NA		391-2688-003
20	DETENT CAP		308-4000-102	HPN-049	314-0100-003
21	DETENT BALL		391-0282-009		391-0282-009
22	DETENT SPRING		391-3581-383	HPN-069	391-3581-383
23	LOCK WASHER		391-3788-002	HPN-115	391-3788-002
24	DETENT RETAINER		391-2583-079	HPN-053	391-2583-079
25	RELIEF VALVE		355-9001-197	HPN-071	355-9001-067
26	WASHER		391-3782-146		391-3784-029
27a	CAPSCREW/MH101-20		391-1401-382		391-1401-111
27 b	CAP SCREW/MH101-25	NA	NA		391-1401-110
28a	CAP SCREW/MH102-20		391-1401-382		391-1425-433
28b	CAP SCREWIMH102-25		NA		391-1425432
29	OPTIONAL SLEEVE	HPN-070	391-3283-052	HPN-070	391-3283-052
30	PIPE PLUG		391-2282-029	HPN-055	391-2282-006
31	SPOOLEND CAP		391-1881-072	HPN-050	391-1881-073
32	SPIRAL PIN		391-2085-009		391-2085-009
33	BRACKET		391-0981-007	HPN-052	391-0981-010
34	S.H.C.SCREW		391-1402-083		391-1402-063
Not Shown	102 SNAP RING		391-2686-083		391-2686-085
Not Shown	102SEAL RETAINER		391-3381-040		391-3383-087
36	102 SPACER		391-3383-069		NA
37	102LIP SEAL		391-2883-119		391-2883-115
38	102 SHAFT END COVER		308-5030-201	HB-1685-3	313-5037-201
39	CHECK VALVES		391-3681-001		391-3681-001
40	MH 102 SHAFT&GEAR SET 7/8"x13 tooth		312-29XX-130		314-29XX-130
	spline
41 a	CAP SCREW/MH101-102		391-1433-020		391-1401-082
Not Shown	SHAFT KEY		391-1781-021		391-1781-021
Not Shown	SEAL RETAINER		391-2183-124		NA

 

 

 

 

Ningbo Hyleman Hydraulics Co., Ltd is a scientific and innovative company integrating R & D, production, sales and service of high-quality hydraulic pumps, motors, valves and other hydraulic products.


Hyleman mainly provides Rexroth A4VSO, A10VSO, A4VG, A7VO, A11VO and A2FO series high-pressure piston pumps, Rexroth PGH3, PGH4 and PGH5 series high-pressure gear pumps, A4VM, A6VM, A2FM and A4FM series piston motors; BM3, BM4,BM5, BM6 and other orbit motors. Through the honing and innovation of Hyleman people, Hyleman series products can not only perfectly replace the original products, but also realize the seamless exchange and connection of all the parts. Moreover, it has lower noise, higher volume efficiency and longer service life, so as to completely surpass the quality of the original factory, and withstand the severe test of the market, has been exported to more than 70 countries and regions around the world.

Hyleman series products are widely used in engineering machinery, plastic machinery, metallurgical machinery, environmental sanitation machinery, mining machinery, marine machinery, packaging machinery, port machinery and various hydraulic equipment, which are highly praised by clients.

Hyleman has the world advanced CNC processing equipment, vertical and horizontal machining centers, high-precision double-sided grinding, groove grinding, curve grinding and full-automatic machining centers. With 12 independent testing laboratories, the products have been comprehensively inspected before shipment to ensure that Hyleman series products achieve high precision, high quality and zero defects.

"Optimizing the performance of hydraulic products, improving the quality of hydraulic products and leading the comprehensive upgrading of hydraulic product consumption" is not only the responsibility and mission of Hyleman, but also the Chinese dream of Hyleman. Hyleman are willing to work with people of insight to make unremitting efforts to realize this dream.

Warmly welcome all friends to visit the beautiful port city - Ningbo to discuss cooperation and seek common development with Hyleman!

 

 

Why Choose HYLEMAN?

1. Top Quality
Depend on 15 years experience at hydraulic pumps design, research, development and manufacturing, we have a top quality compared with domestic and overseas manufacturers, all of our products are with 1 year warranty time.

2. Strict Quality Control System
We have the most strict quality control system, all of our products are 100% tested before shipment and each of them has one tracking code in order to make sure they are with good quality to our customers.

3. Advanced machinery equipment
All the machines we have are new CNC machines we imported from Germany and Japan in order to reach more higher demand at the products accuracy.

4. Strong Technical team
Our technical team all have more than 20 years experience at pumps design and engineering, our chief engineer has more than 40 years experience at pumps design. We have one 15 persons research team, responsible for pumps improvement research and new products development.

5. Competitive Price
Because of good management, our price is more competitive than the original products, more reasonable than most of the domestic suppliers.

6. Fast Delivery time
We can ship small orders within one week, for big orders such as within 500 PCS pumps or cartridge kits usually we can make shipment within one month.

7. Warranty Period
All of our products are within 1 year warranty time after the shipment from our factory.

8. Considerate Service
We can provide technical support at any time if our customers meet any issue during the using, we will provide solutions at the soonest time.

9. Long development strategy
We would like to establish a long time strategy cooperation relationship with our customers, to promote HYLEMAN brand together, support and train the potential customer to be our agent at each country and region all over the world.
 

 

Hot Tags: parker g101/g102 derict mount dump gear pump, China parker g101/g102 derict mount dump gear pump manufacturers, suppliers, factory, Piston Pump PVB PVH PVQ, Hydraulic Piston Pump Rexroth, Kawasaki Axial Piston Pump, Piston Pump Axial Piston Hydraulic Pump, Variable Displacement Piston Pump, Vickers Piston Pump