Rexroth Axial Piston Fixed A2fo Series 70 Bent Pump

Rexroth Axial Piston Fixed A2fo Series 70 Nominal Pressure 400bar Bent Pump

 

Product Introduction:
A2FO Fixed Axial piston pumps , High pressure pump , Open circuit pumps

The pump A2FO is designed to be used in open circuits.
The project planning, installation and commissioning of the axial piston unit requires the involvement of qualified personnel.
Before using the axial piston unit, please read the corresponding instruction manual completely and thoroughly. If necessary, these can be requested from Boschh Rexroth.
During and shortly after operation, there is a risk of burns on the axial piston unit. Take appropriate safety measures (e. g. by wearing protective clothing).
Depending on the operating conditions of the axial piston unit (operating pressure, fluid temperature), the characteristic may shift.

 

Features:

- Fixed pump with axial tapered piston rotary group of bent-axis design, for hydrostatic drives in an open circuit

- For use in mobile and stationary applications

- The flow is proportional to the drive speed and displacement

- The drive shaft bearings are designed for the bearing service life requirements usually encountered in these areas

- High power density

- Small dimensions

- High total efficiency

- Economical design

- One-piece tapered piston with piston rings for sealing

 

Model Codes:

Rexroth Piston A2F motor & A2F pump
A2F10R4P1	A2F10L4P1	A2F10W4P1	A2F55R3P1	A2F55L3P1	A2F55W3P1
A2F10R4P1	A2F10L4P1	A2F10W4P1	A2F55R2P3	A2F55L2P3	A2F55W2P3
A2F10R2P1	A2F10L2P1	A2F10W2P1	A2F55R2Z1	A2F55L2Z1	A2F55W2Z1
A2F10RZ21	A2F10LZ21	A2F10WZ21	A2F63R3Z4	A2F63L3Z4	A2F63W3Z4
A2F12R4P1	A2F12L4P1	A2F12W4P1	A2F63R2Z4	A2F63L2Z4	A2F63W2Z4
A2F12R4P1	A2F12L4P1	A2F12W4P1	A2F63R3P1	A2F63L3P1	A2F63W3P1
A2F12R2P1	A2F12L2P1	A2F12W2P1	A2F63R2Z1	A2F63L2Z1	A2F63W2Z1
A2F12RZ21	A2F12LZ21	A2F12WZ21	A2F80R3Z4	A2F80L3Z4	A2F80W3Z4
A2F23R3Z4	A2F23L3Z4	A2F23W3Z4	A2F80R2Z4	A2F80L2Z4	A2F80W2Z4
A2F23R2Z4	A2F23L2Z4	A2F23W2Z4	A2F80R3P1	A2F80L3P1	A2F80W3P1
A2F23R3P1	A2F23L3P1	A2F23W3P1	A2F80R2Z1	A2F80L2Z1	A2F80W2Z1
A2F23RZ21	A2F23LZ21	A2F23WZ21	A2F107R3Z4	A2F107L3Z4	A2F107W3Z4
A2F88R3Z4	A2F88L3Z4	A2F88W3Z4	A2F107R2Z4	A2F107L2Z4	A2F107W2Z4
A2F88R2Z4	A2F88L2Z4	A2F88W2Z4	A2F107R3P2	A2F107L3P2	A2F107W3P2
A2F88R3P1	A2F88L3P1	A2F88W3P1	A2F107RZP1	A2F107LZP1	A2F107WZP1
A2F88RZ21	A2F88LZ21	A2F88WZ21	A2F160R3P2	A2F160L3P2	A2F160W3P2
A2F45R3Z4	A2F45L3Z4	A2F45W3Z4	A2F160R3P3	A2F160L3P3	A2F160W3P3
A2F45R2Z4	A2F45L2Z4	A2F45W2Z4	A2F160RZ5P1	A2F160LZ5P1	A2F160WZ5P1
A2F45R3P1	A2F45L3P1	A2F45W3P1	A2F160RZ21	A2F160LZ21	A2F160WZ21
A2F45RZ21	A2F45LZ21	A2F45WZ21	A2F250R5P1	A2F250L5P1	A2F250W5P1
A2F55R3Z4	A2F55L3Z4	A2F55W3Z4	A2F250R5P2	A2F250L5P2	A2F250W5P2
A2F55R2Z4	A2F55L2Z4	A2F55W2Z4	A2F355R5P2	A2F355L5P2	A2F355W5P1
A2F107RZ22	A2F107LZ22	A2F107WZ22	A2F500R5P2	A2F500L5P2	A2F500W5P1

 

 Axial piston unit of bent axis design with fixed displacement, for use as either pump or
motor in hydrostatic drives, in open or closed circuit.
If operated as a pump, the flow is proportional to the drive speed and displacement. If
operated as a motor, the output speed is proportional to the swept volume and inversely
proportional to displacement. The output torque increases with the pressure drop between
the high and low pressure sides.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ROTARY GROUPS FOR PISTON PUMP
Rexroth	A4V, A4VSO, A4VG, A6VM, A7VO, A8VO, A10VSO, A11V, A11VO, A11VL
Catt	Catt215/225/235/245 & motor grade 12G/14G/16G Catt320, Catt320C, SPK 10/10, SPV10/10
Komatsue	HPV35/55/90/160 (PC60/120/200/300-3/5) HPV95/132 (PC60/200/220/300- 6/7) KMF90/160 KPV 90/105 (PC200-2)
Sauer	PV18/20/21/22/23/24/25/26/27 PV90- 030//042/055/075/100/130/180 /250 PV6/119 PV42-48 MPVO 46 MFTO 35
Hitachi	HPV116/102/105/145 (EX200-1,EX200-5,EX300-1/2/3) HPV091 DW/EW (EX200/220-2/3) PVD-2B 34/36/40/42
Kawasaki	K3V 45/63/112/140/180 DT&BDT KVC 925/930/932 NV 45/50/60/64/70/80/84/90/111/120/137/172/210/237/270
	NV 237/270, NVK45 M2X 63/96/120/146/150/170/210 M5X 130/160/180 GM 8/9/10/18/20/24/28/35/38VL
Vickers	PVB 5/6/10/15/20/29/45 PVH 57/74/98/131/140 PVE 19/21
Linde	HPR 100, BPR 80/140/186 BMF 35/55/75/105 BMV 35/55/75/105
	HPV 130-01, HMF50/63, BPV 50/75/100, MPR63, B2PV 35/50/75/105
Uchida	A8VO 55/80/86/107/115/160/172 AP2D 14/21/25/36/38/42 A10VD 17/23/28/40/43/71, AP5S 53/67
Eaton	3331-006/007, 4621,4631,5421,5431,6423,7620,7621,7862
Lieb	LPVD 64/75/90/100/125/140/150
Yuken	A37/45/56/70/90/140
Bent-axial piston pump/motor:
	A2F 12/23/2855/80/107/125/160/180/200/225/250/300/350/355/500
	A3V 55/80/107
	A2FO 10/12/16/23/28/56/63/80/90/107/125/180/200/225/250/355/500
	A7V 55/80/107/160/225/250/355/500/550
	A8V 55/80/107/160/355/500
PISTON PUMP/MOTOR
1.1 A10VSO/O-31 SERIES
1.2 A10VSO/O 16/18/28/45/71/100/140-31
A4VSG/SO 40/71/125/180/250/500
1.3 A4VTG90
1.4 A11VO75/85/130/145/190/260
A2F/6.1 series
A2F16 , A2F28 , A2F32 , A2F56 , A2F63 , A2F80 , A2F90 , A2F125 , A2F107 , A2F160 , A2F180
A2FO series
A2FO28 , A2FO32 , A2FO56 , A2FO63 , A2FO80 , A2FO90 , A2FO125 , A2FO107 , A2FO160 , A2FO180
A2F/1 2 3 4 5 series
A2F10 , A2F12 , A2F23 , A2F28 , A2F45 , A2F55 , A2F63 , A2F80 , A2F90 , A2F107 , A2F125 , A2F160 , A2F180 , A2F250
A2FE series
A2FE56 , A2FE63 , A2FE80 , A2FE90 , A2FE107 , A2FE125 , A2FE160 , A2FE180
K3V63DT/112DT/140DT

 

Ningbo Hyleman Hydraulics Co., Ltd is a scientific and innovative company integrating R & D, production, sales and service of high-quality hydraulic pumps, motors, valves and other hydraulic products.


Hyleman mainly provides Rexroth A4VSO, A10VSO, A4VG, A7VO, A11VO and A2FO series high-pressure piston pumps, Rexroth PGH3, PGH4 and PGH5 series high-pressure gear pumps, A4VM, A6VM, A2FM and A4FM series piston motors; BM3, BM4,BM5, BM6 and other orbit motors. Through the honing and innovation of Hyleman people, Hyleman series products can not only perfectly replace the original products, but also realize the seamless exchange and connection of all the parts. Moreover, it has lower noise, higher volume efficiency and longer service life, so as to completely surpass the quality of the original factory, and withstand the severe test of the market, has been exported to more than 70 countries and regions around the world.

Hyleman series products are widely used in engineering machinery, plastic machinery, metallurgical machinery, environmental sanitation machinery, mining machinery, marine machinery, packaging machinery, port machinery and various hydraulic equipment, which are highly praised by clients.

Hyleman has the world advanced CNC processing equipment, vertical and horizontal machining centers, high-precision double-sided grinding, groove grinding, curve grinding and full-automatic machining centers. With 12 independent testing laboratories, the products have been comprehensively inspected before shipment to ensure that Hyleman series products achieve high precision, high quality and zero defects.

"Optimizing the performance of hydraulic products, improving the quality of hydraulic products and leading the comprehensive upgrading of hydraulic product consumption" is not only the responsibility and mission of Hyleman, but also the Chinese dream of Hyleman. Hyleman are willing to work with people of insight to make unremitting efforts to realize this dream.

Warmly welcome all friends to visit the beautiful port city - Ningbo to discuss cooperation and seek common development with Hyleman!

 

 

Why Choose HYLEMAN?

1. Top Quality
Depend on 15 years experience at hydraulic pumps design, research, development and manufacturing, we have a top quality compared with domestic and overseas manufacturers, all of our products are with 1 year warranty time.

2. Strict Quality Control System
We have the most strict quality control system, all of our products are 100% tested before shipment and each of them has one tracking code in order to make sure they are with good quality to our customers.

3. Advanced machinery equipment
All the machines we have are new CNC machines we imported from Germany and Japan in order to reach more higher demand at the products accuracy.

4. Strong Technical team
Our technical team all have more than 20 years experience at pumps design and engineering, our chief engineer has more than 40 years experience at pumps design. We have one 15 persons research team, responsible for pumps improvement research and new products development.

5. Competitive Price
Because of good management, our price is more competitive than the original products, more reasonable than most of the domestic suppliers.

6. Fast Delivery time
We can ship small orders within one week, for big orders such as within 500 PCS pumps or cartridge kits usually we can make shipment within one month.

7. Warranty Period
All of our products are within 1 year warranty time after the shipment from our factory.

8. Considerate Service
We can provide technical support at any time if our customers meet any issue during the using, we will provide solutions at the soonest time.

9. Long development strategy
We would like to establish a long time strategy cooperation relationship with our customers, to promote HYLEMAN brand together, support and train the potential customer to be our agent at each country and region all over the world.
 

 

Hot Tags: rexroth axial piston fixed a2fo series 70 bent pump, China rexroth axial piston fixed a2fo series 70 bent pump manufacturers, suppliers, factory, Air Operated Piston Pump, Bent Axis Piston Pump, Kawasaki Axial Piston Pump, Eaton Hydraulic Piston Pump, Rexroth Hydraulic Piston Pump, Variable Displacement Piston Pump